Perancangan dan Analisis Jig Pengelasan Stang BMX untuk Meningkatkan Presisi dan Efisiensi Produksi

Feby Namifa Pebriana; Amira Najla Hartini; Tasya Riski Mulyadi Tanjung; Adinda Rahmah Shalihah

doi:10.52330/jaet.v1i1.619

Authors

Feby Namifa Pebriana Politeknik STMI Jakarta
Amira Najla Hartini Politeknik STMI Jakarta
Tasya Riski Mulyadi Tanjung Politeknik STMI Jakarta
Adinda Rahmah Shalihah Politeknik STMI Jakarta

DOI:

https://doi.org/10.52330/jaet.v1i1.619

Keywords:

Autodesk Inventor, jig welding, stang BMX, welding fixture, workshop otomotif

Abstract

Perkembangan teknologi manufaktur pada bidang otomotif menuntut proses produksi yang lebih presisi, efisien, dan konsisten, terutama pada proses pengelasan komponen tubular seperti stang BMX. Namun, proses produksi stang BMX pada skala laboratorium masih banyak dilakukan secara manual sehingga sering terjadi pergeseran posisi material, ketidaksesuaian sudut sambungan, dan lamanya waktu pemasangan benda kerja. Penelitian ini bertujuan merancang jig pengelasan stang BMX yang sederhana, mudah digunakan, serta memungkinkan untuk diproduksi secara nyata di lingkungan kampus. Solusi yang ditawarkan berupa pengembangan jig welding dengan sistem clamp horizontal dan vertikal untuk menjaga kestabilan posisi stang selama proses pengelasan berlangsung. Kontribusi penelitian ini adalah menghasilkan desain jig yang aplikatif untuk kegiatan praktikum dan produksi sederhana pada Program Studi Teknologi Rekayasa Otomotif

References

Arnaoutis, V., Rosic, B. V., & Lutters, E. (2023). Parametric design evolution for production setups; a case study for welding fixtures. Procedia CIRP, 120, 1522–1527. https://doi.org/10.1016/j.procir.2023.09.208

Chen, L., & Liu, J. (2024). Research on online intelligent welding system based on resistance spot welding of aluminum galvanized steel. Advances in Mechanical Engineering, 16(3). https://doi.org/10.1177/16878132241236568

Costa Oliveira, F. A., Borges, P. F., Coelho, A., Amaral, P. M., & Cruz Fernandes, J. (2025). Manufacturing of Diamond Tool Segments via Microwave–Hybrid Sintering. Journal of Manufacturing and Materials Processing, 9(11). https://doi.org/10.3390/jmmp9110370

Djafar Shieddieque, A., Setiawan, D., Rahdiana, N., Studi Teknik Mesin, P., & Tinggi Tekologi Wastukancana, S. (2021). Purwakarta, 41151 4 Program Studi Teknik Industri Otomotif. Politeknik STMI Jakarta Jl Letjen Suprapto, 1(2), 41361. http://journal.ubpkarawang.ac.id./index.php/JTMMX

Fiedler, F., Ehrenstein, J., Höltgen, C., Blondrath, A., Schäper, L., Göppert, A., & Schmitt, R. (2024). Jigs and fixtures in production: A systematic literature review. In Journal of Manufacturing Systems (Vol. 72, pp. 373–405). Elsevier B.V. https://doi.org/10.1016/j.jmsy.2023.10.006

Hu, Y., Pei, W., Ji, H., Yu, R., & Liu, S. (2024). Tungsten Inert Gas Welding of 6061-T6 Aluminum Alloy Frame: Finite Element Simulation and Experiment. Materials, 17(5). https://doi.org/10.3390/ma17051039

Ibrahim, A. D., Hussein, H. M. A., Ahmed, I., Nasr, E. A., Kamrani, A., & Abdelwahab, S. A. (2022). Computer-Aided Design of Traditional Jigs and Fixtures. In Applied Sciences (Switzerland) (Vol. 12, Number 1). MDPI. https://doi.org/10.3390/app12010003

Indrawan, R., Aditya Purnomo, D., Bisono, F., Wiro Karuniawan, B., & Anita Fajardini, R. (2024). Design and Fabrication of Jig and Fixture for Milling Operations in the Manufacturing Sector (Vol. 26, Number 4).

Li, Y., Li, Y., Ma, X., Zhang, X., Fu, D., & Yan, Q. (2022). Study on Welding Deformation and Optimization of Fixture Scheme for Thin-Walled Flame Cylinder. Materials, 15(18). https://doi.org/10.3390/ma15186418

Liu, H., Wang, C., Li, T., Bo, Q., Liu, K., & Wang, Y. (2022). Fixturing technology and system for thin-walled parts machining: a review. In Frontiers of Mechanical Engineering (Vol. 17, Number 4). Higher Education Press Limited Company. https://doi.org/10.1007/s11465-022-0711-5

Mali, S. C., & Vyavahare, R. T. (2015). International Journal of Current Engineering and Technology An Ergonomic Evaluation of an Industrial Workstation: A Review. In 1820| International Journal of Current Engineering and Technology (Vol. 5, Number 3). http://inpressco.com/category/ijcet

Matli, P. R., Guttikonda, M., Gopal, K. R., & Lingala, S. S. R. (2025). Processing, Microstructure and Performance of Aluminium Metal Matrix Composites for Engineering Applications—A Review. Progress in Composite Materials, 1(1). https://doi.org/10.53941/pcm.2025.100006

Naksri, C., Chuchom, S., & Chaiprapat, S. (2021). Design of Fixture for Welding. IOP Conference Series: Materials Science and Engineering, 1163(1), 012007. https://doi.org/10.1088/1757-899x/1163/1/012007

Novak, N., Plesec, V., Harih, G., Cupar, A., Kaljun, J., & Vesenjak, M. (2023). Development, fabrication and mechanical characterisation of auxetic bicycle handlebar grip. Scientific Reports, 13(1). https://doi.org/10.1038/s41598-023-35418-8

Priyamanggala, A., Yazid Diratama, M., Cahyadi Jurusan Teknik Manufaktur, R., & Manufaktur Bandung, P. (2023). Perancangan Jig and fixture Untuk Pembuatan Ragum Tipe 125 (Vol. 25, Number 1).

Purbaningrum, S. P., Johannes, J., Imansuri, F., Salati, D., & Solih, E. S. (2023). Implementasi Jig Welding Untuk Meningkatkan Efisiensi Pengelasan Frame Base. Journal of Community Services in Sustainability, 2(1), 55–64. https://doi.org/10.52330/jocss.v2i1.277

Riaz, A. A., Hussain, G., Ullah, N., Wei, H., Alkahtani, M., & Khan, M. N. (2021). An investigation on the effects of tool rotational speed and material temper on post-ISF tensile properties of Al2219 alloy. Journal of Materials Research and Technology, 10, 853–867. https://doi.org/10.1016/j.jmrt.2020.12.055

S. Safril, Wan Hamzah, W. A., & Mustakim. (2025). Investigation of different compressor speeds to improve the performance of residential air conditioning system using hybrid nanolubricant. Journal of Mechanical Engineering and Sciences, 10554–10564. https://doi.org/10.15282/jmes.19.1.2025.10.0827

Satria, A., Adinda Rahmah Shalihah, Fadhil Fadhlurrohman Nurhadi, Ridho Hans Gurning, & Sanurya Putri Purbaning. (2025). Structure Analysis of Warren Truss Bridge Using 3D CAD Software. Jurnal Inotera, 10(2), 241–250. https://doi.org/10.31572/inotera.vol10.iss2.2025.id486

Seloane, W. T., Mpofu, K., Ramatsetse, B. I., & Modungwa, D. (2020). Conceptual design of intelligent reconfigurable welding fixture for rail car manufacturing industry. Procedia CIRP, 91, 583–593. https://doi.org/10.1016/j.procir.2020.02.217

Setiawan, I., Setiawan, R., Zahabiyah, R., Lestari, T. D., Triantoro, V. W., Farrel, V., H., Y. A., & Puspita, W. Y. (2023). Penerapan Jig & Fixture pada Produksi Massal di Industri Manufaktur. Jurnal Media Teknik Dan Sistem Industri, 7(2), 104. https://doi.org/10.35194/jmtsi.v7i2.3165

Yao, K. C., Huang, W. T., Xu, J. R., Huang, S. H., Tsai, C. T., Ho, W. S., & Liao, C. C. (2023). Application of the TRIZ Innovation System Method to Bicycle Handlebars. Machines, 11(5). https://doi.org/10.3390/machines11050507